The Ultimate Plexiglass Scraper Sharpener
 |
The EdgrTM sharpener is a precision, electric rotary bench tool for sharpening and flattening plexiglass ski wax scrapers.
One swipe and you will have a better than new plexi scraper. In fact you will have a WICKED Sharp scraper. Follow the link to see the cure for the crappy scraper video & more.
|
After being able to use the Edgr for the past week, It Rocks! It could be the single best tool in our shop."
Sean, VT USA
|
Wicked Flat True Bars
 |
- EdgrTM True Bars available in both low cost Aluminum and Precision ground, heat treated tool steel.
- Machined 60 deg bevel for ease of viewing.
- Alpine true bars measure 1-3/4" tall x 6"long x .25" thick.
- Snowboard true bars measure 1-3/4" tall x 13" long x .25" thick.
- Tool steel models are hardened to Rc60 then ground flat and black oxide coated. Neoprene hand grips make it easy to hold.
- Aluminum are machined flat and black annodized.
- All models come with a protective edge guard.
- Available in our web store or at our select race shops across the USA.
|
Wicked Nice Side Edge File Guides
 |
- One of the finest side edge file guides you can buy.
- Vertical exhaust port allows filings to fall freely to the bench below.
- Angled shelf catches filings and channels them to the exhaust port
- Clamp pockets on rear allow clamps to be placed closer to the edge of the guide giving you more useage of your files
- Two screw down attachment points for a +- 1 Deg shim (SST only)
- Buffed finish looks wicked nice!
- Available in SST and Aluminum
- Made in Wisconsin, USA (Not imported from Mexico or China)
- Buy in our web store or at our select race shops across the USA.
|
CBJ-Special Sidewall Plane
 |
- Made to cut bumpers very close to the edge.
- Shavings trough prevents build up of sidewall shavings.
- Completely adjustable tool holder
- Brass guide rod won't damage the edge
- Adaptable for southpaws or righty's.
- Black anodized finish looks wicked nice!
- Made in Wisconsin, USA
|
| |
|
WICKED Sharp Plexiglass Ski & Snowboard Wax Scrapers
 |
- Premium grade 5MM, 6MM and 9MM thick ski and snowboard plexiglass wax scrapers.
- Router cut for a WICKED Sharp and very flat edge.
- Generous sizes for Snowboards as well as Alpine and Nordic skis make them easier to hold and resharpen.
- The really sharp edge makes a noticeable difference in wax removeal.
- Available in our web store individually or in cost saving multi packs.
- Custom screening for ski teams and shops.
|
GRIP STICK TM Grip Wax Scrapers
 |
- The Grip Stick makes removing grip wax and clister a breeze.
- The stick is manufactured from soft high density plastic so it won't damage your ski base.
- It is sized to fit in the hand with a beveled edge to get under the sticky stuff and give it a place to go. It is also stiff and long enough to give you great leverage. Don't be afraid to really put pressure on it.
- Use it as shown or flip it over for a chisel tip. It only takes one swipe on each side of the groove to take off the wax, leaves and dirt of the day. A thin layer of base wax will remain on the ski so you can simply reapply new wax of the day or quickly clean the base with citrus solvent and fibertex.
- Available in our web store individually or in handy combi packs.
- Bulk wholesale orders and custom screening are also available for this item.
|
